There is no one like you

For todays blog I thought I would show two of the same cards with different colours. All the Supplies will be printed after the content.

To start with I did a drippy watercolour background, first put water across the paper and let it drip down towards the bottom. I next placed yellow over the water and let it flow down, then added orange so they would mix. I continued to do this until I got the depth of colour I wanted and let it dry. You can also use a heat gun to dry as well.

After the background was ready I used the Remember This stamp set from Altenew and placed the stamps I wanted to use onto the card so I could get an idea of what I wanted for placement. Next I took the main flower and stamped it with the black outline. I also stamped another flower onto some scrap paper and die cut it out so I would have a mask for this flower. Placing the mask over the flower I then stamped the leaves and small flowers in place. If the leaves or flowers did not come from under the flower the way I wanted them I adjusted the mask and stamped again. A stamp positioner is great for this as only the mask has to be moved. I coloured the leaves and then removed the mask and used the next layer to colour the flower. The red flower is part of the same colour family and the blue flower is complimentary. After I used the sentiment from Incredible Stamp set. Then added some rhinestones for glitter. Next I covered the back with some fun foam for height. A plain simple beautiful card for almost any occasion.

Supplies

Altenew Remember This and Incredible Stamps

White Card Stock #110 and #80

Windsor Newton Water Colours

Stamp Positioner

Remember This Flower layers 2 & 3, Leaves 2&3

Inks permanent black, Rubellite, Eastern Sky, Evergreen, Frayed leaf.

Fun foam

Rinestones from stash.

SPOTLIGHT AN IMAGE

Good Morning, no rain today so we are all happy. Today I wanted to show you how to showcase or spotlight and image.I learnt this trick from Jennifer McQuire. I will list my supplies down below. The background is black with white pigment ink stamping with the Altenew Remember This stamp set. I did some 1st and 2nd generational stamping to help give depth. I deliberately left where I tried to double stamp, it gives the appearance of wind blowing. Now for the the flower I stamped the outline in black, both flower and leaves. Next was learning to water colour them, one leaf and petal at a time. I placed a small amount of water on one petal, painted it in layers with Rough, Rubellite, and Ruby Red. Skip a petal and follow the same procedures making sure I did not paint side by side petals. It took a lot of practice to have the look I wanted. After the flower was done I did the same with the leaves using Limeaide and Moss. Then it was time to die cut out my images, even the practice flowers. Next I placed the flower on my card base and positioned where I wanted to glue down the leaves. After the leaves are in place I borrowed another trick from Jennifer McQuire, and glued the flowers on top of each other then glued it onto the card. I stamped You are one of a kind sentiment from Altenew’s Incredible stamp set, with Versa Mark onto black card stock and embossed with white embossing powder, and glued it right onto the top of the card.. I finished off the card with some iridescent dots.

SUPPLIES

Stamp & Die bundles. Altenew Remember This & Incredible

Water Colour Markers. Altenew. Spring Garden & Winter Wonderland

Pigment ink. Hero Arts Unicorn White

Embossing Powder. Nuvo. Glacier White

Card Stock Reflections #110 White

Measurements

Card Base 5 1/4 x 8 Folded in half

Back Card Stock. 5 x 3 3/4 placed on front of card

Remember This

I love season changes and one of my favourite spring colours is yellow, it is so warm and inviting. This card size is 5 1/4 x 4 and the topper is 5 x 3 3/4

I stared by taking the flower outline in Gray Denim and stamped along the left edge top to bottom right edge forming a triangle. Next I stamped the same outline in Fresh Lemon, then first layer in Citrus Burst and third layer in Maple Yellow. For the final layer I used Hero Arts Orange Crush to give depth and accent. The flower buds were done the same way only no Orange Crush. The leaves were with Frayed Leaf and Forest Glades. After cutting the flowers and buds I placed them on onto the topper raising up one with fun foam, after this the card looked unfinished to me so covering my work with scrape paper I put Gray Denim onto my craft mat added a little water and took a paint brush to splatter the card. This made a huge difference to me. I finished my card with some dollar store sequins and You are one of a kind stamp on some gray cardstock stamped with versa mark and covered with Wow Space Dust embossing powder. Such a pretty soft card.

SUPPLIES

Stamps and Die Altenew Build a Flower. Remember This

Inks. Altenew New Pocket of Sunshine and Gentleman’s Gray, Green Fields as well as Hero Arts Orange Crush

Embossing Powder. Wow Space Dust

Paper. Neena Solar White #110

Stamp Positioner

Art Glitter Glue

Fun Foam

INCREDIBLE

For this Card I choose JGaultier’s June Altenew challenge. He choose to use Lapis Lazuli and Coffee Break to present a male card. For the background I used the Coffee Break colours, Sand Dunes, Rocky Shore, and Mocha. I smudged each colour onto my craft mat, dropped a small amount of water on the same mat and then took some old plastic wrap dipped it into the water then into the ink colour and transferred the colour to the card top. I did this with each colour separately until I covered most of the top in a circle pattern. Then I put this aside to air dry and worked on the flower.

With the Incredible stamp set I took the small flower and the half flower, using a stamp positioner, stamped them onto a separate paper with Ultramarine Blue then stamped over with Versa Mark ink covered with Clear Embossing powder and heat set them. Now comes the best part, painting the flowers, don’t forget the practice one so mistakes can be on it. I played each colour onto my craft mat and a separate puddle of water, took my paint brush dipped into water, then into the iceberg and painted each leaf separately I did not look for even coverage and I heat dried before doing using Eastern Sky. With Eastern Sky I dipped into water then flicked feathered lines for each petal going from the centre of the flower towards the centre of the petal giving an appearance of veins, then heat dried. Next came the Ultramarine Blue and going over or beside the Eastern Sky for the added dimension to the flowers, I finished off the flowers with the stamens coated with Espresso. I choose the long leaf from Stargazer build a flower, stamping with the Iceberg then Eastern Sky for the second layer. For the leaf I choose not to use a third layer. After I die cut the flowers and leaf I layered them over the toper making a triangle. The full flower was raised with some fun foam and I put-on some Hai clear sequins. I forgot to put a wood grain layered edge on my card dragged the edges with Eastern Sky to give a wooded look. I love this card and thing the outline gives it a stunning appearance.

SUPPLIES

Card Stock Neena Solar White #110

card measurements are Base 5 1/4 x 4. Topper 5 x 3 3/4

Stamps Altenew Build a flower Incredible and Stargazer

Inks. Altenew Lapis Lazuli and Coffee Break

Sequins HAI mixed clear droplets

Garden Bouquet

P1010631

This is a simple beautiful garden of flowers, from the Begonia Build a Flower stamp and die set.

One stamp and two different colour palettes, how pretty they look together. First I choose the colours I wanted and then started to stamp the layers.The first colours I used was from the Warm Spring colours starting with the outline in black, then Buttercream, Warm Sunshine, Coral Berry, and finally Ruby Red. Notice how each colour gives another layer of depth to the flower and how you can stop at any layer or skip a layer and change the look of the flower. For the second flower I used Cherry Blossom colour set and started the same way going through each colour. By using Altenew layering stamps you get perfect layers each time, I always do a practice sheet as well as the sheet I will put my stamps on for die cutting. I do this for two reasons the first so I am sure I have lined up the stamps correctly and the second so I know my colours are going to work together. This is not a big problem if you are using a colour set but is if you are using independent colours.

The leaves I did with Frayed Leaf and Forest Glade, I felt the darker colours would be too close to the same shades in the flower and would not give the dimension I was looking for.

All that is left is to figure out how to place your flowers and leaves on the topper. I placed them where I wanted them to go put some painters tape on them to hold everything in place then flipped the design over and placed crafters tape on the back of each flower and leaf holding them together. Next remove the painters tape from the front and place the flowers onto the card top. Cut off any over hanging edgers and place onto the card. Finish with a sentiment strip and some bling if you wish. I left mine bling free.

SUPPLIES

Altenew

Build a Flower.      Begonia

Inks.                         Warm Spring, Cherry Blossom, and Green Fields with Permanent Black

Stamp Platform

Be Creative Tape

 

 

 

 

Washi Tape

P1010635

I think this is a fun and quick way to use your Washi Tape. I have this Altenew Washi Tape and put onto a card to get a good look at the pattern, I like what I saw and as I was doing another card I kept thinking of what the Washi would look like if I painted it, so I did.  The leaves are done with  Frayed Leaf and Forest Glades inks use as water colour paints, the flowers with Butter Cream and Warm Sunshine, and some old inexpensive water colour paint. To finish off the card  I used the Hugs script, triple layered it in black, then put on a few Dollar Store Sequins I have in my stash and called it finished. To put the topper onto the card I used some score tape and Art Glitter Glue because the Washi will not allow the score tape to set on it.

SUPPLIES

Card Stock,   Neena Solar White #110.  card is 5 1/2 x 4 1/4  the topper is 5 1/4 x 4.

Inks.  Altenew   Frayed Leaf, Forest Glades, Buttercream, Warm Sunshine.

Die.    Altenew  Hello and Hugs

 

 

Hello

 

Today’s stamp is a Hellebore flower, grown in zone 5 -8b, with 20 different species. Also this plant although very pretty is very poisonous.

Today I used the Altenew Sea Shore ink set. Including the centres, there are six layers to this flower and three layers to the buds.  As with all layering stamps you must practice first so that you know where to place each layer. I always practice on good quality Cardstock, Neena #110 solar white.  The reason for this is I always have flowers ready if I need a special card, or as I gather them I can put together a bouquet for a card.

For this card I stamped directly onto the Cardstock, so took the time to place the stamps where I felt they should go then started stamping. This way I have a vision of how I want to showcase my flowers.

I use a stamp positioner so I can get accurate layers as I line them up. Layer one is Mountain Mist, next I take layer two, line it up and stamp with Volcano Lake, stamp then move onto Layer three, Lagoon, and finally Emerald for the dark shadows. The flower part is finished and now onto the centres using Buttercream, then Coral Berry for the dots.

Next came the buds. First I made a post it note mask for my flower, then stamped the buds where I wanted them. All the buds started with Mountain Mist, then Volcano Lake. For two buds I finished with Lagoon, the other three were finished with Emerald. This creates interest and different depth to the buds.

To finish the card I stamped the leaves using two different leaves from the set. The colours were Sweet Leaf and Just Green. One set had both layers and other had the third layer using only Just Green.

For the Sentiment I stamped hello with Azurite Blue, then used my hello die, cut it twice in white Cardstock with double sided tape and then the top layer with an alcohol ink background card in greens, then layer it over the blue so the blue is a shadow. I finished to card off with sequins.

P1010619.jpeg

 

 

 

 

 

 

 

 

 

 

Thanks

P1010627.jpeg

 

Clematises are so beautiful, I have one that climbs our front deck and have had it for years. Here in the colder climates they are very hard to grow and keep year after year. Mine is very special because it died and we did not replace it but somehow there was a Shute under the deck, so about 4 years later it starts growing again. Wonderful how God works in our lives.

My stamps and inks are Altenew Climbing Clematis and shades of purple inks for layering.  Some wink of Stella, and Creative Expressions Thanks Shadow Die. My card stock is Solar White Neena #110, 5 1/2 by 4 1/4 The grey glitter card stock is cut to leave a narrow trim from the base and the final layer is 5 1/4 x 4.

Layering the stamps on this flower are easier than others because you follow the petal pattern for each flower step you are doing. Start with Soft Lilac, Lavender Field, your deeper accents are Deep Iris finally Midnight Violet. My centres were Butter Cream, Orange Soda from Hero Arts and Coral Berry and Ruby red. The Leaves are done in Forest Glades and Evergreen.

First I stamped the flowers on my 5 1/4 by 4  size card base. I masked off the flowers as I place the leaves around it, and then I fussy cut one Clematis out and foam taped it onto the composition. After everything was in place I used Wink of Stella for a couple of leaves and the centre of the raised flower.

The Thanks was cut out on a soft pink card stock and the thanks shadow on  gray glitter Cardstock. I added some pink and gold sequins to the card and called it finished

 

ALWAYS STAY AWESOME

P1010615.jpeg

This picture is  a generational stamping technique described below. I just finished the card below and my Lilly arrived so I did some generational stamping on some 49th and Market paper. Loved how it turned out so had to show it off.

For Always stay awesome this is how to  do this.

This lesson is about generational layering, taught by Nicole Picadura. Generational stamping is using one ink pad and getting multiple shades to get dimension on your card. The stamp set I used is Altenew Bellflower with Memento Tuxedo Black.

I used Michael’s #110 card stock, my card base is 5 1/4″ x 4″ and the topper is 5″ x 3 3/4″

Before starting to layer onto your card  practice layering your stamps according to the instructions that come with the flower onto scrap paper. This gives a more realistic and tidy look to your flowers.

To start we need a piece of scrap paper, old printer paper is just fine. I used the B stamps starting with B1, stamping it on the black ink, then stamping it on the scrap paper 3 times, and then onto the card base.  I covered the card with the stamps, using the same steps. Next I used B2 and inked it up and stamped on the scrap paper twice then onto the bottom layer. Next was B3 and again inking the stamp and stamping onto the scrap paper once then onto the image. At this point you can see the detail, and our last stamp B4 was inked then put onto the stamp image.

B5 and B6 are attached to the bottom of the flower, using 3rd and 1st generational stamping. I did put one bud on my card because it needed a space to be used up.

On a separate Cardstock I used the Misty Morning ink sets and stamped the same stamp set using Dew Drops, Teal Cove, Aqualicious, then Galactic Stream. For the leaves, Sweet Leaf and Just Green. I then placed it over one of the flowers,  raising it with foam tape The sentiment is from Delicate Flower Bed, always Stay AWESOME.

To finish off the card I took some dot stamps from another set and used Sweet Leaf and placed them around some flowers for added depth and my bling from HAI mixed clear droplets.

P1010618.jpeg

Shine Bright

 

P1010596.jpgShine Bright is a layering and masking card, the colours used were momento black, Altenew ruby red and coral berry, a generic green for the leaves, and Hero Arts Butter Bar and Pumpkin Pie. Finished with Spectrum Noir clear shimmer and PL5 ink for dots. I use what I have on hand as I build my stash of everything cards and paper. Altenew build a flower Hellebore.

The first thing I learnt was the value of practicing before committing to card stock. The reason for this is to see the how your placement is looking. Sometimes it is off a bit and looks ok, but then you have that perfect placement and it looks great, like you want the flower to look. First I stamped the outline  in black on the large flower, then ruby red for the colour. When I stamped the flower is also stamped and cut out a mask from post it note paper and placed it over the flower. next came the smaller flowers coming from behind the large one. By placing the flower where you want it over the mask you put it behind that flower. This gives depth and a pleasing look to your bouquet. I then removed the mask, placed the stems and leaves, applied the centres with the yellows. The dots were done with Spectrum Noir PL5 Then I shimmered the black outlines and placed the sentiment.

You do have to be careful that you don’t use the post is note to often when wet. Let it dry before going onto another card or it bleeds through and you have to do some creative masking.